Ceiling Fan Assembly - Luminance Brands Kathy Ireland Home RAH ECO CF915TM60BS00 El Manual Del Propietario

3.1
Remove and discard the Cardboard Shipping Retainers
from the Fan Motor Assembly (Figure 1).
3.2
NOTE: Be sure NOT to loosen or remove the Green
Ground Wire Screw.
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the ball falls freely
down the Downrod (Figure 2).
Remove the Pin from the Downrod, then remove the
Hanger Ball (Figure 2).
Retain the Pin and Hanger Ball for reinstallation in
Step 3.9.
NOTE: Do not loosen the screw that attaches the
green ground wire to the hanger ball.
3.3
Separate, untwist and unkink the Two 80" Motor Wires.
Route the Two 80" Black and White Motor Wires
through the Downrod (Figure 3).

3. Ceiling Fan Assembly

Figure 1
PIN
PHILLIPS HEAD SET SCREW (LOOSENED)
Figure 2
TWO 80" MOTOR WIRES
TWO 80" MOTOR
LEADS (UNTWISTED)
Figure 3
5
FAN MOTOR
ASSEMBLY
CARDBOARD
SHIPPING
RETAINERS (2)
GREEN GROUND WIRE
GREEN GROUND
WIRE SCREW
8" DOWNROD
HANGER BALL
(UNTWISTED)
DOWNROD
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF915