Final Installation - Luminance Brands Kathy Ireland Home RAH ECO CF915TM60BS00 El Manual Del Propietario

5. How to Wire Your Ceiling Fan
5.5
Screw the Two Threaded Studs (supplied) into the
tapped holes in the Hanger Bracket (Figure 20).
Your Fan is now wired to be turned on and off from the
Fan Switch.
6.1
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the holes in the
Ceiling Cover (Figure 21).
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the two Knurled Knobs (supplied) (Figure 21).
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the Ceiling and the hole in the
Ceiling Cover is clear of the Downrod.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
Figure 20

6. Final Installation

CEILING
COVER
THREADED STUD (2)
LOCKWASHER (2)
KNURLED KNOB (2)
Figure 21
13
(Continued)
HANGER
BRACKET
THREADED
STUD (2)
DOWNROD
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF915