Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LAN
There are three submenus under
the Network menu (shown in figure:
LAN, WAN and MAC Clone. Click any
of them, and you will be able to configure
the corresponding function. The detailed
explanations for each submenu are provided below.
LAN
You can set the parameters of the IP network on this page.
MAC Address - The physical address of the router, as seen from
the LAN. The value can't be changed.
IP Address - Enter the IP address of your router in dotted-decimal
notation (factory default: 192.168.1.1).
Subnet Mask - An address code that determines the size of the
network. Normally use 255.255.255.0 as the subnet mask.
Antes de utilizar su nuevo Kit C
a. If you change the IP Address of LAN, you must use the
new IP Address to login the router.
b. If the new LAN IP Address you set is not in the same
subnet, the IP Address pool in the DHCP sever will not take
effect, until they are re-configured.
c. If the new LAN IP Address you set is not in the same
subnet, the Virtual Server and DMZ Host will change
accordingly at the same time.
ENGLISH-18
Publicidad
Tabla de contenido
