Remote Management - Steren COM-822 Manual Del Usuario

REMOTE MANAGEMENT

You can configure the Remote Management function on this screen.
This feature allows you to manage your Router from a remote
location via the Internet.
Web Management Port - The port number used to access the router.
This router's default remote management web port number is 80. For
greater security, you'd better change the remote management web
interface to a custom port by entering that number in the box
provided. Choose a number between 1024 and 65534, but do not use
the number of any common service port.
Remote Management IP Address - This is the current address you
will use when accessing your router from the Internet. The default
IP address is 0.0.0.0. It means this function is disabled. To enable
this function, change the default IP address to another IP address as
desired.
Antes de utilizar su nuevo Kit C
1) To access the router, you will type your router's WAN IP
address into your browser's address (in IE) or Location (in
Navigator) box, followed by a colon and the custom port
number. For example, if your Router's WAN address is
202.96.12.8, and the port number you use is 8080, please enter
http://202.96.12.8:8080 in your browser. Later, you may be asked
for the router's password. After successfully entering the
username and password, you will be able to access the router's
web-based utility.
2) Be sure to change the router's default password to a very
secure password.
ENGLISH-56