Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1.- Power socket:
The Power socket is where you will connect the power adapter.
2.- RESET
Press the Reset button for five seconds and then wait for the router to
reboot.
3.- WAN
This WAN port is where you will connect the DSL/cable Modem, or
Ethernet
4.- LAN 1-4
These ports (1, 2, 3, 4) connect the router to the local PC(s)
5.- Wireless antenna.
To receive and transmit the wireless data.
System Requirements:
•
Broadband Internet Access Service (DSL/Cable/Ethernet)
•
One DSL/Cable modem that has an RJ45 connector (you do not
•
need it if you connect the router to Ethernet)
•
Each PC on the LAN needs a working Ethernet Adapter and an
•
Ethernet cable with RJ45 connectors
•
TCP/IP protocol must be installed on each PC
•
Web browser, such as Microsoft Internet Explorer 5.0 or later,
•
Netscape Navigator 6.0 or later
Installation environment requirements
•
Not in direct sunlight or near a heater or heating vent
•
Not cluttered or crowded. There should be at least 2 inches of
•
clear space on all sides of the router
•
Well ventilated (especially if it is in a closet)
•
Operating temperature: 32°~104°F
•
Operating Humidity: 10%~90%RH, Non-condensing
REQUIREMENTS
ENGLISH-04
Publicidad
Tabla de contenido
