Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
with a DTIM Interval value. You can specify the value between 1-255
Beacon Intervals. The default value is 1, which indicates the DTIM
Interval is the same as Beacon Interval.
Enable WMM - WMM function can guarantee the packets with
high- priority messages being transmitted preferentially. It is strongly
recommended enabled.
Enable Short GI - This function is recommended for it will increase the
data capacity by reducing the guard interval time.
Antes de utilizar su nuevo Kit C
If you are not familiar with the setting items in this page, it's
strongly recommended to keep the provided default values,
otherwise may result in lower wireless network performance.
WIRELESS STATISTICS
MAC Address - The connected wireless station's MAC address
Current Status - The connected wireless station's running status,
one of STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK /
WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected
Received Packets - Packets received by the station
Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this
page and to show the current connected wireless stations, click on
the Refresh button. If the numbers of connected wireless stations go
beyond one page, click the Next button to go to the next page and
click the Previous button to return the previous page.
Antes de utilizar su nuevo Kit C
This page will be refreshed automatically every 5 seconds.
ENGLISH-33
Publicidad
Tabla de contenido
