Steren COM-822 Manual Del Usuario página 23

Ocultar thumbs Ver también para COM-822:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

If you want to do some advanced configurations, please click the
Advanced button, and the page shown in Figure will then appear:
MTU Size - The default MTU size is "1492" bytes, which is usually
fine. It is not recommended that you change the default MTU Size
unless required by your ISP.
Service Name/AC Name - The service name and AC (Access
Concentrator) name, which should not be configured unless you are
sure it is necessary for your ISP. In most cases, leaving these fields
blank will work.
ISP Specified IP Address - If your ISP does not automatically assign
IP addresses to the router during login, please click "Use IP address
specified by ISP" check box and enter the IP address provided by
your ISP in dotted-decimal notation.
Detect Online Interval - The router will detect Access Concentrator
online at every interval. The default value is "0". You can input the
value between "0"and "120". The value "0" means no detect.
DNS IP address - If your ISP does not automatically assign DNS
addresses to the router during login, please click "Use the following
DNS servers" check box and enter the IP address in dotted-decimal
notation of your ISP's primary DNS server. If a secondary DNS
server address is available, enter it as well.
Click the Save button to save your settings.
ENGLISH-23

Publicidad

Tabla de contenido
loading

Tabla de contenido