Steren COM-822 Manual Del Usuario página 26

Channel - This field determines which operating frequency will be
used. The default channel is set to 6. It is not necessary to change
the wireless channel unless you notice interference problems with
another nearby access point
Channel width - Select any channel width from the pull-down list. The
default setting is automatic, which can adjust the channel width for
your clients automatically.
Rate- Select the appropriate wireless network rate from the pull-down
list.
Enable Wireless Router Radio - The wireless radio of this Router can
be enabled or disabled to allow wireless stations access.
Enable SSID Broadcast - When wireless clients survey the local area
for wireless networks to associate with, they will detect the SSID
broadcast by the Router. If you select the Enable
SSID Broadcast checkbox, the Wireless Router will broadcast its
name (SSID) on the air.
ENGLISH-26