Steren COM-822 Manual Del Usuario página 50

To add static routing entries:
1. Click Add New you will see the following screen.
2. Enter the following data:
Destination IP Address - The Destination IP Address is the address of
the network or host that you want to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP
Address is the network portion, and which portion is the host portion.
Gateway - This is the IP Address of the gateway device that allows for
contact between the router and the network or host.
3. Select Enabled or Disabled for this entry on the Status pull-down
list.
4. Click the Save button to make the entry take effect.
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous
screen, click the Next button to view the information in the next
screen.
ENGLISH-50