Steren COM-822 Manual Del Usuario página 45

Action - This field displays the action that the Router takes to deal
with the traffic. Allow means that the Router allows the traffic through
the Router, Deny means that the Router rejects the traffic through the
router.
Status - This field displays the status of the rule. Enabled means the
rule will take effect, Disabled means the rule will not take effect.
Antes de utilizar su nuevo Kit C
Before adding an IP Address Filtering entry, you should enable
the Firewall and the IP Address Filtering function first
To add/modify an IP Address filtering entry:
For example:
If you desire to block E-mail received and sent by the IP address
192.168.1.7 on your local network during the time of 1800 to
2200; And wish to make the PCs with IP addresses 192.168.1.8 to
192.168.1.12 unable to visit the website of IP address
202.96.134.12 all the day, while other PCs have no limit. You can
configure the rules as follows.
1. Enable the "Firewall" and "IP Address Filtering" on the Firewall
screen, and then, you should select the Default IP Address Filtering
Rule "Allow the packets not specified by any filtering rules to pass
through the router".
2. Click Add New.../Modify, you will see a new screen. Enter the
"Effective time" for the rule to take effect.
ENGLISH-45