Steren COM-822 Manual Del Usuario página 28

• WEP Key Format - ASCII and Hexadecimal formats are provided.
ASCII format stands for any combination of keyboard characters in
the specified length. Hexadecimal format stands for any combination
of hexadecimal digits (0-9, a-f, A-F) in the specified length.
• WEP Key settings - Select which of the four keys will be used and
enter the matching WEP key that you create. Make sure these values
are identical on all wireless stations in your network.
• Key Type - You can select the WEP key length (64-bit, or 128-bit,
or 152-bit.) for encryption. "Disabled" means this WEP key entry is
invalid.
64-bit - You can enter 10 hexadecimal digits (any combination of 0-9,
a-f, A-F, zero key is not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of
0-9, a-f, A-F, zero key is not promoted) or 13 ASCII characters.
152-bit - You can enter 32 hexadecimal digits (any combination of
0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters.
Antes de utilizar su nuevo Kit C
If you do not set the key, the wireless security function is still
disabled even if you have selected Shared Key as Authentication
Type.
WPA /WPA2
Version - you can choose the version of the WPA security on the
pull-down list. The default setting is Automatic, which can select WPA
(Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically
based on the wireless station's capability and request.
• Encryption - You can select either Automatic, or TKIP or AES.
• Radius Server IP - Enter the IP address of the Radius Server.
• Radius Port - Enter the port that radius service used.
• Radius Password - Enter the password for the Radius Server.
• Group Key Update Period - Specify the group key update interval
in seconds. The value should be 30 or above. Enter 0 to disable the
update.
ENGLISH-28