Steren COM-822 Manual Del Usuario página 38

To setup a virtual server entry:
1. Click the Add New button.
2. Select the service you want to use from the Common Service Port
list. If the Common Service Port list does not have the service that
you want to use, type the number of the service port or service port
range in the Service Port box.
3. Type the IP Address of the computer in the Server IP Address box.
4. Select the protocol used for this application, either TCP or UDP, or
All.
5. Select the Enable check box to enable the virtual server.
6. Click the Save button.
Antes de utilizar su nuevo Kit C
If your computer or server has more than one type of available
service, please select another service, and enter the same IP
Address for that computer or server.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to
delete the entry, click the Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/ Disabled All button to make all entries enabled/
disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous
button to return the previous page.
ENGLISH-38