Setting Up Your Videohub Controller - Blackmagic Design Videohub Master Control Pro Manual De Instalación Y Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 135
The Blackmagic Videohub folder contains three Videohub applications. Videohub
Control, Videohub Setup, and Videohub Hardware Panel Setup.
Updating the Software in your Videohub Controller
Follow these steps to check if your Videohub control panel's internal software is up to date:
1
Connect your Videohub control panel to the computer via USB.
2
Launch the Blackmagic Videohub Hardware Panel Setup.
3
If a software update is required, a message will appear asking if you would like to
update your Videohub control panel. Click Yes. The update will take about 2 minutes
to complete.
4
The message "Software Update Complete" should appear at completion of the update.
Click OK to dismiss the message. Settings can be changed now if desired and this is a
good opportunity to give each Videohub control panel a unique name.
5
You can now unplug the USB cable from your Videohub control panel.
This message will appear if an internal software update is required.

Setting up your Videohub Controller

Blackmagic Videohub Setup is an administration utility used to configure your Videohub,
customize your input and output labels, name your Videohub, and adjust the network settings,
and more.
NOTE
After installing the Blackmagic Videohub software, the Videohub Server is also
automatically installed.
Getting Started
10

Publicidad

Tabla de contenido
loading

Productos relacionados para Blackmagic Design Videohub Master Control Pro

Este manual también es adecuado para:

Videohub smart control pro

Tabla de contenido