Blackmagic Design Videohub Master Control Pro Manual De Instalación Y Funcionamiento página 25

3 Using the numeric pushbuttons, type the destination number, e.g., 3 for Studio 3.
Each numeric button will flash gold as you press it.
4 Scroll the wheel forwards or backwards until the desired destination is found. In
this example, any of VTR 3, Edit 3, Mon 3A or Mon 3B could be displayed on the
LCD. If you make a mistake, press the white CLEAR button and select another
destination number.
5 Press the SRC button. The source field will be highlighted blue on the LCD.
6 Using the numeric pushbuttons, type the source number, e.g., 3 for Studio 3. Each
numeric button will flash white as you press it.
7 Scroll the wheel forwards or backwards until the desired source is found. In this
example, any of VTR 3, Edit 3, Cam 3A or Cam 3B could be displayed on the
LCD. If you make a mistake, press the white CLEAR button and select another
source number.
8 The TAKE button will flash red, awaiting your confirmation of the route change. Press
TAKE and the route will change immediately. Otherwise, press CLEAR and no route
change will take place. Videohub Master Control will then return to its idle state with
the latest route displayed on the LCD.
In this example, the numeric button "3" has been selected so only video sources with a
"3" in their label will be listed, on the LCD, when the scroll wheel is rotated. This provides
a fast way to find a video source because you only have to scroll through a short list of
equipment based upon a group number, e.g. only list the equipment in Studio 3.
How to select devices using the customizable and numeric buttons together
If you have customized the Videohub port labels with names and numbers, you can use the
customizable buttons and numeric buttons together to directly select sources and destinations.
This method is very fast and intuitive because you don't have to scroll through a list of
equipment and you only have to remember how many of each type of equipment you have,
e.g., two VTRs and four monitors.
This method is very helpful if you label types of equipment by name and number, e.g., VTR 01,
VTR 02, Cam 01, Cam 02, Cam 03, Mon 01, Mon 02, Mon 03 and Mon 04.
1 Press the DEST button. The destination field will be highlighted blue on the LCD.
2 If your Videohub router has RS-422 remote control, press the LEVEL button until you
have set the appropriate routing level for your equipment. Otherwise you can skip
this step.
3 Press a button you have customized for a type of destination equipment, e.g., VTR.
The button should light gold.
4 Type in the destination equipment number using the numeric pushbuttons, e.g., 07 for
VTR 07. Each numeric button will flash gold as you press it.
5 Press the SRC button. The source field will be highlighted blue on the LCD.
6 Press a button you have customized for a type of source equipment, e.g., a capture
card. The button should light white.
Getting Started 25