Labeling Pushbuttons; About Routing Levels - Blackmagic Design Videohub Master Control Pro Manual De Instalación Y Funcionamiento

Labeling Pushbuttons

Videohub Master Control Pro and Videohub Smart Control Pro have removable pushbuttons
that provide access for labeling.
Included with the software installer is a Videohub Control Labels folder containing a
PDF template file. Fill out and print the PDF file labels. Then cut out the square labels so they
are ready to be inserted into the buttons.
To remove the buttons:
1
Place your Videohub control panel on a desk
or workbench.
3
Loosely place your new printed label into the
upturned clear keycap.

About Routing Levels

If your Videohub does not feature RS-422 remote deck control, Videohub Master Control will
always show "SDI" on its LCD and you don't need to read anything more about routing levels.
If your Videohub does include RS-422 remote deck control ports, you can use the LEVEL
button on Videohub Master Control to reduce the list of sources and destinations by
routing level.
Start by pressing the DEST button. Now press the LEVEL button to cycle through the
routing levels:
2
The button keycaps can be easily removed by
inserting your fingernail between the keycap
and the button.
4
Replace the keycap by aligning it onto the
button and gently push until you feel it click
into place.
Getting Started 20