Spare And Wearing Parts - Bosch 1 687 010 400 Manual Original

en 18 | 1 687 010 400 | Maintenance
5. Maintenance
5.1 Checking hose lines
Always handle hose lines (high-pressure and low-pres-
sure hoses) with care and check before use. Hose lines
must be replaced if checking reveals the following signs
of damage:
R
Cracks, brittle areas, abrasion or blistering at the
hose jacket.
R
Kinked hose line.
R
Stiff union nuts or quick-release couplings.
R
Deformed or damaged connection end of hose line
(sealing cone, plug-in nipple, etc.).
R
Leakage at fitting.
R
Corrosion at fitting if strength is reduced as a result.
!
Damaged hose lines are not to be repaired.
5.2

Spare and wearing parts

Designation
Hose line for Denso
<)
Hose line for Siemens/VDO/Conti
O-ring (12x) for Siemens/VDO/Conti hose
<)
line
Adapter cable (Denso)
<)
Adapter cable (Siemens/VDO/Conti)
Wearing part
<)
|
1 689 989 197 2014-04-01
Order number
1 680 712 368
1 680 712 369
<)
1 680 210 141
1 684 465 670
1 684 465 672
<)
5.3 Decommissioning
See section on decommissioning in the original instruc-
tions for the EPS 200 and EPS 205.
Robert Bosch GmbH