Before You Begin; Installing Equipment - Juniper Networks SSG 20 Guía De Instalación Y Configuración De Hardware

SSG 20 Hardware Installation and Configuration Guide

Before You Begin

Installing Equipment

NOTE:
Before You Begin
20
The location of the chassis, the layout of the mounting equipment, and the security
of your wiring room are crucial for proper system operation.
WARNING: To prevent abuse and intrusion by unauthorized personnel, install the
SSG 20 device in a secure environment.
Observing the following precautions can prevent shutdowns, equipment failures,
and injuries:
Before installation, always check that the power supply is disconnected from
any power source.
Ensure that the room in which you operate the device has adequate air
circulation and that the room temperature does not exceed 104
Do not place the device in an equipment-rack frame that blocks an intake or
exhaust port. Ensure that enclosed racks have fans and louvered sides.
Correct these hazardous conditions before any installation: moist or wet floors,
leaks, ungrounded or frayed power cables, or missing safety grounds.
You can front-mount, wall-mount, or desk-mount an SSG 20 device. The mounting
kits may be purchased separately.
To mount an SSG 20 device, you need a number-2 phillips screwdriver (not
provided) and screws that are compatible with the equipment rack (included in the
kit).
When mounting a device, make sure that it is within reach of the power outlet.
F (40 C).
° °