Basic Device Configuration; Root Admin Name And Password - Juniper Networks SSG 20 Guía De Instalación Y Configuración De Hardware

Basic Device Configuration

Root Admin Name and Password

NOTE:
This section describes the following basic configuration settings:
Root Admin Name and Password
Date and Time
Bridge Group Interfaces
Administrative Access
Management Services
Hostname and Domain Name
Default Route
Management Interface Address
Backup Untrust Interface Configuration
The root admin user has complete privileges for configuring an SSG 20 device. We
recommend that you change the default root admin name and password (both
netscreen) immediately.
To change the root admin name and password, use the WebUI or CLI as follows:
WebUI
Configuration > Admin > Administrators > Edit (for the netscreen
administrator name value): Enter the following, then click OK:
Administrator Name:
Old Password: netscreen
New Password:
Confirm New Password:
Passwords are not displayed in the WebUI.
CLI
set admin name name
set admin password pswd_str
save
Basic Device Configuration
33