Organization; Webui Conventions - Juniper Networks SSG 20 Guía De Instalación Y Configuración De Hardware

SSG 20 Hardware Installation and Configuration Guide

Organization

WebUI Conventions

Organization
6
This guide contains the following sections:
Chapter 1, "Hardware Overview," describes the chassis and components of an
SSG 20 device.
Chapter 2, "Installing and Connecting the Device," describes how to mount an
SSG 20 device and how to connect cables and power to the device.
Chapter 3, "Configuring the Device," describes how to configure and manage
an SSG 20 device and how to perform some basic configuration tasks.
Chapter 4, "Servicing the Device," describes service and maintenance
procedures for the SSG 20 device.
Appendix A, "Specifications," provides general system specifications for the
SSG 20 device.
Appendix B, "Initial Configuration Wizard," provides detailed information about
using the Initial configuration Wizard (ICW) for an SSG 20 device.
To perform a task with the WebUI, you first navigate to the appropriate dialog box,
where you then define objects and set parameters. A chevron ( > ) shows the
navigational sequence through the WebUI, which you follow by clicking menu
options and links. The set of instructions for each task is divided into navigational
path and configuration settings.
The following figure lists the path to the address configuration dialog box with the
following sample configuration settings:
Objects > Addresses > List > New: Enter the following, then click OK:
Address Name: addr_1
IP Address/Domain Name:
IP/Netmask: (select), 10.2.2.5/32
Zone: Untrust