Wireless Antennae - Juniper Networks SSG 20 Guía De Instalación Y Configuración De Hardware

SSG 20 Hardware Installation and Configuration Guide
Connecting a Device to a Network
26

Wireless Antennae

If you are using the wireless interface, you need to connect the provided antennae
on the device. If you have the standard 2dB diversity antennae, use screws to attach
them onto the posts marked A and B at the back of the device. Bend each antenna
at its elbows, making sure not to put pressure on the bulkhead connectors.
Figure 12: SSG 20-WLAN Antennae Location
Antenna B
B
Bulkhead connector
If you are using the optional external antenna, follow the connection instructions
that came with that antenna.
L OCK
RESET DC POWER
USB A
1 2 V 4
Bulkhead connector
Antenna A
A