14. Interface Summary Window - Juniper Networks SSG 20 Guía De Instalación Y Configuración De Hardware

SSG 20 Hardware Installation and Configuration Guide
82
Table 27: Fields in Wireless0/0 Interface Window
Field
Wlan Mode
SSID
Authentication and Encryption Sets the WLAN interface authentication and encryption:
Interface IP
Netmask

14. Interface Summary Window

After you have configured the WAN interfaces, you will see the Interface Summary
window.
Figure 43: Interface Summary Window
Description
Sets the WLAN radio mode:
5G (802.11a).
2.4G (802.11b/g).
Both (802.11a/b/g).
Sets the SSID name.
Open authentication, the default, allows anyone to access
the device. There is no encryption for this authentication
option.
WPA Pre-Shared Key authentication sets the Pre-Shared Key
(PSK) or passphrase that must be entered when accessing a
wireless connection. You can choose to enter a HEX or an
ASCII value for the PSK. A HEX PSK must be a 256-bit
(64-text character) HEX value. An ASCII passphrase must be
8 to 63 text characters. You must select Temporal Key
Integrity Protocol (TKIP) or Advanced Encryption Standard
(AES) as the encryption type for this option, or select Auto to
allow either option.
WPA2 Pre-Shared Key.
WPA Auto Pre-Shared Key.
Sets the WLAN interface IP address.
Sets the WLAN interface netmask.