9. V.92 Modem Interface Window; 10. Eth0/0 Interface (Untrust Zone) Window - Juniper Networks SSG 20 Guía De Instalación Y Configuración De Hardware

SSG 20 Hardware Installation and Configuration Guide
78
Field Description
Dialer Pool (Dialer only) Sets the dialer pool name for the dialer interface.
Netmask Sets the netmask.
Gateway Sets the gateway address.

9. V.92 Modem Interface Window

If you have the V.92 mini-PIM installed in your device, you can configure the
serialx/0 (Modem) interface using the following window:
Figure 38: Modem Interface Window
Table 23: Fields in Modem Interface Window
Field
Modem Name
Init String
ISP Name
Primary Number
Alternative Number (optional)
Login Name
Password
Confirm

10. Eth0/0 Interface (Untrust Zone) Window

The eth0/0 interface can have a static or a dynamic IP address assigned via DHCP
or PPPoE.
Description
Sets the name for the modem interface
Sets the initialization string for the modem
Assigns a name to the service provider
Specifies the phone number to access the service provider
Specifies an alternative phone number to access the service
provider if the primary number does not connect
Sets the login name for the service provider account
Sets the password for the login name
Confirms the password typed in the Password field