Tele Radio T60 Manual De Instrucciones página 176

CONTENTS / AMERICAN
176 Important Information
177 Codes
177 Placement of the Aerial and Receiver
178 The Transmitter
183 The Receiver
192 Supplement for the 460 system
195 Service and Support
196 Trouble Shooting Chart
197 Terms and conditions of sale
199 FCC Statements
200 Coding Tables 1-10,Appendix A
201 Coding Tables 0-15,Appendix B
202 Coding Tables 460-93,Appendix C
207 Connecting the receiver – see Appendix D
IMPORTANT!
In order to make optimal use of your system, it is important that
you take the time to read through this manual before you begin
to install/program your equipment.
GENERAL INFORMATION
The system works at the frequency 433.92MHz and uses frequency
modulation, commonly referred to as FM.The main benefit of using FM
instead of the more common AM (amplitude modulation) is that FM is less
sensitive to the electrical interference generated by computers, electric
motors, etc.
Objects positioned between the transmitter and receiver aerial, especially
large metal objects (think about the reinforcement rods in concrete walls),
can affect the range in a very unpredictable manner, depending on how the
radio signals spread.
The effect of other radio transmitters operating on the same frequency
in the vicinity also affects the range. Due to these factors, it is difficult to
provide any general advice other than that if there is a free line of visibility
between the transmitter and the receiver the range with an optimal signal
should be the best.
The normal range for the transmitter in an interference-free environment
is about 50-100m.
176