Tele Radio T60 Manual De Instrucciones página 192

4. Press the desired port number button (0-999) and an optional function
button (up, stop, down) on the transmitter.
-Red LED flashes three times.
5. Check that the relay switches when one of the transmitter buttons is
pressed again.
T60TX-0XSHL/-SOL/-STL AND T60RX-03ADL
1.Check that the transmitter's system switch (A) is in the ON
position.
2.Set a unique code on the transmitter's code switch (B) 1-10.
3.Press the self-instruction button (C) on the receiver.
-Red LED lights (programming mode 6 seconds).
4.If buttons 1-3 are pressed, the relays in the receiver will
function as buttons 1-3. If buttons 4-6 are pressed, the
relays in the receiver will function as buttons 4-6, and so on.
5.Press the desired function button (1-6) on the transmitter.
-Red LED flashes three times.
6.Check that the relay switches when the same function
button is pressed again.
(B)
(A)
1 2 3 1 2 3 4 4
1 2 3 4 5 6 7 8 9 1 0
ON
+
0
1
192
0 0
5 6 7 8 9 1 5 6 7 8 9 1
(C)
1 2 3
1 2 3
4 5 6