Tele Radio T60 Manual De Instrucciones página 191

Register fixed individual code:
1.Press the self-instruction button for at least 0.3 seconds, max. 4 seconds.
2.Release the button (less than 1 second).
3.Press the button again (longer than 1 second).
-Private program mode, red LED goes out and lights again.
4.Press the desired function button.
-Red LED flashes rapidly three times.
5.The private code is now stored.
-Red LED double-flashes every other second.
CO-PROGRAMMING THE TRANSMITTER AND
DIN-RECEIVER
T60TX-15SML AND T60RX-03ADL
1. Check that the transmitter's system switch (A) is in the ON position.
2. Set a unique code on the transmitter's code switch (B) 1-10.
3. Press the self-instruction button (C) on the receiver.
-Red LED lights (programming mode 6 seconds).
4.If buttons 1-3 are pressed, the relays in the receiver will function as
buttons 1-3. If buttons 4-6 are pressed, the relays in the receiver will
function as buttons 4-6, and so on.
5. Press the desired function button (1-15) on the transmitter.
-Red LED flashes three times.
6. Check that the relay switches when the same function button is
pressed again.
(A)
1 2 3
+
ON
0
1
T60TX-15DML AND T60RX-03ADL
1.Check that the transmitter's system switch (A) is in the ON
position.
2.Set a unique code on the transmitter's code switch (B) 1-10.
3. Press the self-instruction button (C) on the receiver.
-Red LED lights (programming mode 6 seconds).
(B)
4 5 6 7 8 9 1 0
(C)
191