Tele Radio T60 Manual De Instrucciones página 185

PROGRAMMING RECEIVERS T60RX-0XYSL
The function and select buttons on the receiver are used to program it. The
function button is used to step
through the different program alternatives.The select button is used to
confirm program alternative selections.
Initially, it is possible to step through the following alternatives by pressing
the function button.
RED LED (no. 6)
YELLOW LED (no. 7) - Set the momentary/latched relay function
GREEN LED (no. 8)
When one of the above program alternatives has been selected using the
select button, the function button is used to step through which relay or
relays are to be programmed.The red LEDs above the relays indicate which
relay or relays are selected. See further under the appropriate programming
sequence.
LEARNING THE TRANSMITTER'S CODE
Adjustable code
Ensure that the desired adjustable code is set on the transmitter's code
switch.
1. Use the function button to select the "learn code" program alternative
(RED LED).
2. Confirm the selection with the select button.The red LEDs above the
relays light.
3.Using the function button, it is possible to step through to the relay or
relays to be coded.
- If a single relay is selected, it will be controlled by the transmitter
button used during the learning process.
- If all relays are selected, the system will exhibit normal functionality.
That is, the transmitter's first button is to control relay 1, button 2 is to
control relay 2, and so on.
4. Confirm that the adjustable code is to be learnt by pressing the select
button once.
- Learn a transmitter's code
- Set the interlock function
185