Nameplate; Storing The Product - Grundfos NK Serie Instrucciones De Instalación Y Funcionamiento

3.3 Handling
Warning
Motors from 4 kW and up are supplied with lifting
eyes which must not be used for lifting the entire
pump unit.
Lift the pumps by means of nylon straps and shackles.
Fig. 1 Correct lifting of pump
Fig. 2 Incorrect lifting of pump

3.4 Storing the product

The contractor must inspect the equipment on delivery and make
sure that it is stored in such a way that corrosion and damage are
avoided.
If more than six months will pass before the equipment is put into
operation, please consider applying a suitable corrosion inhibitor
to the internal pump parts.
Make sure that the corrosion inhibitor used does not affect the
rubber parts with which it comes into contact.
Make sure that the corrosion inhibitor can be easily removed.
To prevent water, dust, etc. from entering the pump, all openings
must be kept covered until the pipes are fitted. The cost of having
to dismantle the pump during startup to remove foreign objects
can be very high.
6
4. Identification

4.1 Nameplate

Type
1
NKG 200-150-200/210-170 H2 F 3 N KE O 2926
2 Model B 98051910 P2 0512 0001
3
Q 225.5 m /h
H
3
p/t
25/120
bar/°C
MAX
4
Made in Hungary
5
7
Fig. 3 Example of NKG nameplate
Legend
Pos. Description
1 Type designation
2 Model
3 Rated flow
4 Pressure rating or maximum temperature
5 Country of origin
6 Rated speed
7 Pump head
8 Minimum efficiency index
Hydraulic pump efficiency at optimum efficiency
9
point
DK-8850 Bjerringbro, Denmark
-1
2.8 960
m n min
6
0.70 77.1
p
%
8 9