27. Press downward on the back edge of the glove box
(2) and raise the glove box past the two stops (1).
28. Close the glove box.
29. Position the radio to the instrument panel.
30. Connect the AM/FM antenna (2).
31. Connect the factory electrical connector (1) and the
connector from the supplied wiring harness that was
routed from the HFM.
32. Connect the satellite/navigation antenna (3).
33. If equipped, connect the USB connectors (4), includ
ing the one that was routed from the HFM.
34. Install the radio mounting fasteners.
Jun 03, 2011
9
K6861338