Mopar 82212906 Manual De Instrucciones página 64

17. Connect the factory wiring harness connector (2) to
the HFM overlay harness connector (1).
18. If equipped with USB, connect the factory USB con­
nector (4) to the USB extension harness connector
(3).
19. Route the overlay harness and extension cable along
the existing harness to the radio.
20. Using the supplied tie straps, secure the overlay wiring
harness and USB extension cable so that the wires will
not cause any noise or chafing.
21. Position the radio to the instrument panel.
22. Connect the AM/FM antenna (2).
23. Connect the factory electrical connector (1) and the
connector from the supplied overlay wiring harness
that was routed from the HFM.
24. Connect the satellite/navigation antenna (3).
25. If equipped, connect the USB connectors (4), includ­
ing the one that was routed from the HFM.
26. Install and tighten the radio mounting fasteners (1).
Jun 03, 2011
5
K6861338