Mopar 82212906 Manual De Instrucciones página 103

2
1. Disconnect and isolate the battery negative cable.
2. Using Trim Stick C­4755 remove the center bezel (2)
from the instrument panel (1) by releasing the snap
retainers from the instrument panel.
3. Disconnect the electrical connectors.
4. Remove the center bezel from the vehicle.
5. Remove the radio mounting fasteners (1).
CAUTION: Pulling the antenna cable straight out of the
radio without pulling on the locking antenna connec­
tor could damage the cable or radio.
6. Pull the radio out far enough to access the back of the
radio.
7. Disconnect the AM/FM antenna (2) and electrical con­
nectors (1).
8. If equipped, disconnect the navigation antenna (3).
9. If equipped, disconnect the USB connectors (4).
10. Remove the radio from the instrument panel.
Jun 03, 2011 K6861338