2
1. Disconnect and isolate the battery negative cable.
2. Using Trim Stick C4755 work around the perimeter of
the bezel, and across the middle releasing the retain
ing clips (1) and separate the bezel from the instru
ment panel.
3. Disconnect the electrical connectors (1) and remove
the bezel.
4. Remove the radio mounting fasteners.
CAUTION: Pulling the antenna cable straight out of the
radio without pulling on the locking antenna connec
tor could damage the cable or radio.
5. Pull the radio out far enough to access the back of the
radio.
6. Disconnect the AM/FM antenna (2) and electrical con
nectors (1).
7. If equipped, disconnect the navigation antenna (3).
8. If equipped, disconnect the USB connectors (4).
9. Remove the radio from the instrument panel.
Jun 03, 2011
K6861338