Mopar 82212906 Manual De Instrucciones página 121

2
1. Disconnect and isolate the negative battery cable.
2. Using Trim Stick C­4755 work around the perimeter of
the bezel (1) releasing the retaining clips and separate
the bezel from the instrument panel.
3. Remove the radio (2) mounting fasteners (1).
CAUTION: Pulling the antenna cable straight out of the
radio without pulling on the locking antenna connec­
tor could damage the cable or radio.
4. Pull the radio out far enough to access the back of the
radio.
5. Disconnect the AM/FM antenna (2) and electrical con­
nectors (1).
6. If equipped, disconnect the navigation antenna (3).
7. If equipped, disconnect the USB connectors (4).
8. Remove the radio from the instrument panel.
Jun 03, 2011 K6861338