4
15. Release the remaining 13 retaining clips (1) and re
move the trim panel (2).
CAUTION: Pulling the antenna cable straight out of the
radio without pulling on the locking antenna connec
tor could damage the cable or radio.
16. Remove the radio mounting screws.
17. Pull the radio out far enough to access the back of the
radio.
18. Disconnect the AM/FM antenna (2) and electrical con
nectors (1).
19. If equipped, disconnect the navigation antenna (3).
20. If equipped, disconnect the USB connectors (4).
21. Remove the radio from the instrument panel.
22. After removing the 10way connector (1) from the back
of the radio, secure it to the existing harness with a tie
strap (2).
Jun 03, 2011
K6861338