6
22. Install the silencer panel (1) and install the screws (2).
23. Install the driver side end cap (1).
24. Position the radio to the instrument panel.
25. Connect the AM/FM antenna (2).
26. Connect the factory electrical connector (1) and the
connector from the supplied overlay wiring harness
that was routed from the HFM.
27. Connect the satellite/navigation antenna (3).
28. If equipped, connect the USB connectors (4), includ
ing the one that was routed from the HFM.
29. Install the radio mounting fasteners.
Jun 03, 2011
K6861338