Descargar Imprimir esta página

Mopar 82212906 Manual De Instrucciones página 40

Publicidad

Idiomas disponibles

Idiomas disponibles

2
PROCEDURE STEPS:
1. Disconnect and isolate the negative battery cable.
2. If equipped with power windows, using Trim Stick
C­4755 gently pry the switch assembly (2) away from
the trim panel (1), disconnect the electrical connector
and remove the switch.
3. For vehicles without power windows, using Trim Stick
C­4755 gently pry the storage bin assembly away from
the bezel and remove the bin.
4. Each air outlet (1) is secured by a retaining tab (3) lo­
cated on the outlet, and a stop tab (4) located on the
back of the trim panel. Access the retaining tab from
the inside of the air outlet, through the square open­
ings (2) provided.
NOTE: Center­right outlet shown. Other outlet similar.
5. Rotate the louvers of both air outlets (1) in the center
of the instrument panel (6) to the eleven­o­clock posi­
tion (2).
6. Place a small screwdriver (4) or equivalent through the
square opening (5) inside of each air outlet, located at
the twelve­thirty position (3).
7. Carefully pry the retaining tab (3, shown in previous
illustration) toward the center of the air outlet and ro­
tate the outlets counterclockwise.
8. Remove the air outlets from the trim panel.
Jun 03, 2011
K6861338

Publicidad

loading