Publicidad
Idiomas disponibles
Idiomas disponibles
16. Connect the factory wiring harness connector (2) to
the HFM overlay harness connector (1).
17. If equipped with USB, connect the factory USB con
nector (4) to the USB extension harness connector
(3).
18. Route the overlay harness and extension cable along
the existing harness to the radio.
19. Using the supplied tie straps, secure the overlay wiring
harness and USB extension cable so that the wires will
not cause any noise or chafing.
20. Position the steering column opening cover (1) back
and seat the retaining clips fully.
21. Position the steering column trim ring back and seat
the retaining clips fully.
Jun 03, 2011
5
K6861338
Publicidad
