Operation; Cycle Start Page; Lower Control Bar - IRTEC smart Manual De Instrucciones

13. Operation.

13.1.

Cycle start page

F1
F2
F3
F4
This page appears each time an irrigation cycle ends and at the first start-up. The machine is set up for
operation by pressing the selection wheel button , otherwise after 2 minutes the display turns off and the
system goes into battery saving mode. Only the external power button can be reset.
13.2.

Lower control bar.

The lower control bar is present on all pages and summarises the instantaneous status of the system.
Going in order from left to right:

Alarm presence indication, with rectangle on (figure 40) there is at least one alarm that can be
consulted on the dedicated page.

Water pressure presence (figure 42)/absence (figure 43) indication, required for machine operation. The
image animation also takes into account the reading delays required to avoid false signal readings
SMART
20/01/2020
118
119
120
123
121
122
F5
F6
F7
F8
57