Stryker X8000 Light Source Manual Del Usuario página 11

3. Mode Button: Selects either Standby or Run mode when pressed.
Standby is the default mode when the light source is powered on.
4. Run LED: Illuminates when the unit is operating in the Run mode. In
Run mode, light output is determined by the up and down switches.
5. LCD: Indicates the light intensity level (0-100%), bulb hours and
language.
6. Up Button: Increases light intensity in Run mode.
7. Cable Clamp: Grasps the light-source end of an inserted fiberoptic
cable. (When no cable is inserted, the bulb automatically turns off to
save bulb hours.)
8. Jaw Handle: Opens the fiberoptic-cable holder.
9. Down Button: Decreases light intensity in Run mode.
Stryker Endoscopy
5900 Optical Court
San Jose, CA 95138 USA
Figure 2 Rear panel of the X8000 console
10. Voice-Control Port: Connects to Stryker voice-control systems.
11. SFB Series Connectors: Enables FireWire connection with Stryker
FireWire devices. Provides connection for remote diagnoses and future
software upgrades.
12. AC Inlet: Connects to the provided power cord for AC power supply.
13. Fuse Holder: Contains two T 5.0 AH 250 V fuses.
14. Equipotentiality Plug: Provides a grounding post for common
grounding with other equipment. Connects to a potential equalization
conductor. The resulting medical electrical system shall follow all
applicable IEC 60601-1 requirements.
10
SIDNE
U.S. Patents:
5850496, 6110107, 6689050
Other patents pending
MADE IN USA
14
11
12, 13
7