Electromagnetic Compatibility - Stryker X8000 Light Source Manual Del Usuario

Electromagnetic Compatibility

Like other electrical medical equipment, the X8000 requires special precautions
to ensure electromagnetic compatibility with other electrical medical devices. To
ensure electromagnetic compatibility (EMC), the X8000 must be installed and
operated according to the EMC information provided in this manual.
Note The X8000 has been designed and tested to comply with IEC
60601-1-2 requirements for EMC with other devices.
Caution Portable equipment may affect the normal function of the
X8000.
W D
ARNING
PROVIDED WITH THE
ELECTROMAGNETIC EMISSIONS OR DECREASED IMMUNITY TO
SUCH EMISSIONS
W I
ARNING
EQUIPMENT
X8000
TO USING IT IN A SURGICAL PROCEDURE
BELOW FOR GUIDANCE IN PLACING THE
Guidance and Manufacturer's Declaration: Electromagnetic Emissions
X8000 is intended for use in the electromagnetic environment specified below. The customer or the
user of X8000 should ensure that it is used in such an environment.
Emissions test
RF emissions CISPR
11
Harmonic emissions
IEC61000-3-2
Voltage Fluctuations/
flicker emissions
IEC61000-3-3
22
O NOT USE CABLES OR ACCESSORIES OTHER THAN THOSE
.
X8000
F THE IS USED ADJACENT TO OR STACKED WITH OTHER
,
OBSERVE AND VERIFY NORMAL OPERATION OF THE
IN THE CONFIGURATION IN WHICH IT WILL BE USED PRIOR
Compliance
Class B
Class A
Complies
X8000,
AS THIS MAY RESULT IN INCREASED
Electromagnetic Environment - guidance
X8000 is suitable for use in all establishments,
including domestic establishments and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
. C
ONSULT THE TABLES
X8000.