Stryker X8000 Light Source Manual Del Usuario página 23

To replace the bulb module:
1. Power down the X8000.
2. Open the bulb door (Figure 5).
Figure 5 Opening the bulb door
Note If the unit is on, opening the bulb door will turn off the bulb.
3. Rotate the handle to the right, grasp the bulb module by the handle, and
remove the bulb (Figure 6).
Figure 6 Removing the bulb module
W D
ARNING
THAN REPLACING THE BULB MODULE
THAN THE BULB MODULE MAY CAUSE BURNS OR PRODUCT
DAMAGE
W D
ARNING
THE HANDLE
BURNS
O NOT REACH INSIDE THE BULB DOOR FOR ANY REASON OTHER
.
O NOT TOUCH ANY PART OF THE BULB MODULE EXCEPT FOR
. T
HE MODULE MAY BE VERY HOT AND CAUSE
.
. T
OUCHING PARTS OTHER
19