Stel THOR 103 Manual De Instrucciones página 55

ENGLISH
THOR 103
COD. 6909500060
10.3-
INTERMITTENCE CYCLE (ED) AND EXCESS TEMPERATURE
The intermittence cycle is the percentage in 10 minutes which the operator must respect so
as not to reach excess temperature.
If the machine goes into excess temperature the yellow led (ref. 3 page 8) lights up.
It is therefore necessary to wait about 10 minutes before resuming cutting.
The amperage value or the work time must be reduced after having resumed cutting.
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
TECHNICAL
DESCRIPTION
55
ENGLISH
THOR 103
COD. 6909500060
10.3-
INTERMITTENCE CYCLE (ED) AND EXCESS TEMPERATURE
The intermittence cycle is the percentage in 10 minutes which the operator must respect so
as not to reach excess temperature.
If the machine goes into excess temperature the yellow led (ref. 3 page 8) lights up.
It is therefore necessary to wait about 10 minutes before resuming cutting.
The amperage value or the work time must be reduced after having resumed cutting.
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
TECHNICAL
DESCRIPTION
55