Technical Data; Items Supplied; Appliance Description; Commissioning - UNITED OFFICE UAV 150 A1 Instrucciones De Uso

Technical data

Mains voltage:
Rated current :
Rated output:
Protection class:
Cutting process for
paper:
Working width:
Cutting capacity:
Collection container size:
Length min. 280 mm
Max. 410 mm
Width min. 115 mm
Overheating protection
This appliance is fitted with overheating protection.
Should the motor overheat due to an overload, the
appliance switches itself off automatically. In this
case, remove the plug and wait until the appliance
has cooled down to room temperature. You can
then reconnect the plug to the mains power socket
and take the appliance back into use.
We recommend that, after 2 minutes of operation,
you allow the appliance to cool down for approx.
60 minutes.

Items supplied

Strip Cut Shredder
Operating instructions
220-240 V ~
50 Hz
0,7 A
150 W
II
Strip cut
security level 2
217 mm
2
5 Sheets (80g/m )

Appliance description

1 Switch
2 Cutter opening
3 Power cable
4 Telescope arm

Commissioning

Take note: As every paper shredder is tested
for functionality after manufacture, it could hap-
pen that paper remnants may be found in the
cutters.
• Place the Strip Cut Shredder attachment onto
a suitable container:
First place the broad end of the appliance on the
edge of the container. Then pull the telescope
arm 4 out sufficiently to ensure that this also
sits securely on the edge of the container.
• Insert the plug into a mains power socket.

Operation

You can shred up to 5 sheets (80g/m
at the same time.
Warning:
Remove all staples and paper clips before feeding
paper into the cutter opening 2. Otherwise the ap-
pliance could be damaged.
- 21 -
2
-Paper)