Drugs And Dosing - Drug Name Only; Drugs And Dosing - Using Pre-Configured Drug Dosing Protocol; Drugs And Dosing - Using User-Programmed Drug Dosing - Alaris Medical Systems IVAC P7000 Manual Del Usuario

These options enable the unit to be set-up for use with a specific drug and/or dosing protocol. Drugs are pre-
configured (see configured options) to enable rapid selection of the drug name, dosing units and default rate.
For increased security using a configured drug maximum and minimum safety limits are programmable for
concentration and dose rates.
The mass infused display is a sum of all drug masses infused which may be of different concentrations
and even drug type. Therefore it should be noted that the relationship between currently displayed
volume infused and mass infused may not directly relate to the current concentration.

Drugs and Dosing - Using pre-configured drug dosing protocol

When a protocol is used the drug name will be
followed by a *. The set by ml/h / set by doserate
option is now available.

Drugs and Dosing - Using user-programmed drug dosing

7001FAOPT73 ISS 13

Drugs and Dosing - Drug name only

1. Press the ? button to access the options menu.
2. Select the DRUGS AND DOSING option using the
chevron keys
3. Press the OK softkey indicated on the screen to
confirm the selection.
4. To select a drug name press the YES softkey
indicated on the display.
5. Press the NO softkey to not select dosing or drug
protocols.
Caution :
1. Press the ? button to access the options menu.
2. Select the DRUGS AND DOSING option using the
chevron keys
3. Press the OK softkey indicated on the screen to
confirm the selection.
4. Select the drug name from the list displayed using
the chevron keys, press the YES softkey indicated
on the display to confirm the selection.
5. Press the YES softkey indicated on the screen to
select DOSING.
6. Press the YES softkey indicated on the screen to
select PROTOCOL. This will select the predefined
protocol for the drug name selected.
7. Enter the dosing information prompted on the
screen for the drug selected using the OK softkey.
8. Press the CONFIRM softkey to enter the drug
name, dosing information and the protocol
selected.
1. Press the ? button to access the options menu.
2. Select the DRUGS AND DOSING option using the
chevron keys
3. Press the OK softkey indicated on the screen to
confirm the selection.
4. Select the drug name from the list displayed using
the chevron keys, press the YES softkey indicated
on the display to confirm the selection.
5. Press the YES softkey indicated on the screen to
select DOSING.
6. Press the NO softkey indicated on the screen to
not select PROTOCOL.
7. Enter the required dosing information via the
screen prompts, using the chevron keys and the
OK softkey.
8. Press the CONFIRM softkey to enter the drug
name, dosing information and the protocol entered.
Getting Started
11 / 87