Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Use the following sheets to record the configuration settings.
1
BACK OFF ______ Drive slack fast start and occlusion auto bolus
2
VOLUME OVER TIME ______ Volume to be delivered over a fixed time enabled
3
INDUCTION ______ Induction option enabled
4
MULTIDOSE ______ Multidose option enabled
5
RATE LOCK ______ Rate lock feature enabled
6
QUIET MODE ______ Quiet mode enabled
7
PRESSURE ALARM ______ Default pressure alarm limit
8
MAX PRESSURE ______ Maximum pressure alarm limit
9
AUTO PRESSURE ______ Automatic pressure option enabled
10
AC FAIL ALARM ______ AC Fail alarm enabled
11
RATE TITRATION ______ Rate titration feature enabled
12
NEOI WARNING ______ Near end of infusion warning time (minutes)
13
EOI POINT ______ End of infusion: percentage of volume in syringe at
14
KVO AT EOI ______ KVO enabled at end of infusion
15
BEAM ALARM ______ Default occlusion alarm level
16
WEIGHT ______ Default patient weight value
17
PURGE RATE ______ Purge rate value
18
BOLUS ______ Bolus Enabled
19
DEFAULT BOLUS ______ Default bolus value
20
CAP BOLUS RATE ______ Maximum cap on bolus rate
21
CAP RATE ______ Maximum cap on infusion rate
22 DISPLAY EVENT LOG ______ Display event log enabled
23
LOG LAST PATIENT ______ Event log last patient or whole log
24
NURSECALL ______ Nurse call enabled
25NURSECALL INVERTED ______ Nurse call inverted
26COMMS PUMP ADDRESS______ Pump communications address
27COMMS MONITOR ONLY______ Comms. monitor only or monitor and control
28 COMMS ODD PARITY ______ Comms parity odd enabled
29
COMMS ASCII ______ Comms ASCII protocol enabled
7001FAOPT73 ISS 13
Specifications, Especificaciones
reduction enabled.
end of infusion
Configuration Record
63 / 87
Publicidad
Tabla de contenido
