Controls And Indicators; Front Panel And Main Display - Alaris Medical Systems IVAC P7000 Manual Del Usuario

START Button - Press to start the
infusion.
STOP Button - Press to stop the
infusion. The Amber light will
flash to indicate an alarm.
PRESSURE TRANSDUCER
- Detects if an infusion line
with a pressure disc is fitted.
The pressure transducer will
measure positive infusion line
pressures.
AC POWER -
illuminated the
connected to AC power and
the internal battery is being
charged.
BATTERY - When illuminated the
pump is running on the internal
battery. When flashing the battery
power is low, less than 30 minutes of
use remains.
Use "Double Chevron" for fast increase / decrease and
the "Single Chevron" for slower increase / decrease of
values shown on the display in set-up and configuration.
Are also referred to as the rate keys.
Pump Status
Infusion Rate
7001FAOPT73 ISS 13
MAIN DISPLAY - For screen information see Front Panel
and Main Display.
Press PURGE/BOLUS to purge the extension line
during set up while the pump is stopped or to bolus
at an accelerated rate while an infusion is running.
When
unit is
Syringe Type

Controls and Indicators

PRESSURE - Use the
PRESSURE button to
display
pressure.
Use "Blank Soft Keys" in
conjunction with
prompts shown on the
display.

Front Panel and Main Display

Getting Started
OPTIONS button - Press
the OPTIONS button to
access drug name and
other optional features.
the pumping
ON/OFF - Press once
the
to switch the pump ON.
Press and hold down
for 3 seconds to switch
the pump OFF.
Time
Review Data
3 / 87