Publicidad
Idiomas disponibles
Idiomas disponibles
4.1AE ASSEMBLY STEp 9
4.1AE ONly
4.1
AE
BOLTS (FF)
CONSOLE MAST
HANDLEBAR COVERS
NOTE: Be careful not to pinch any wires while attaching the
console or handlebar covers.
20
31AE_41AE_OM_Rev1_7.indd 20-21
All manuals and user guides at all-guides.com
HARdWARE fOR STEp 9 :
SCREW (EE)
15 mm
Qty: 8
CONSOLE
* This step is for 4.1AE only.
Open hardware for step 9.
A
CONSOLE CABLES
Attach right handlebar covers over
B
handlebars using 4 screws (ee).
UPPER HANDLEBAR
Repeat on other side.
C
Connect the 5 console cables to the
D
console.
Carefully tuck the console cables into
E
SCREWS (EE)
the console mast before attaching the
console. Attach console to console
CONSOLE
mast using 4 bolts (ff).
WIRES
4.1AE ASSEMBLY COMPLETE!
ELLIPTICAL OPERATION
BOLT (FF)
This section explains how to use your elliptical's console and programming.
12 mm
Qty: 4
The BASIC OPERATION section in the ELLIPTICAL gUIDE has instructions for the following:
• lOCATION Of THE EllIpTICAl
• pOWER/GROUNdING INSTRUCTIONS
• fOOT pOSITIONING
• MOVING THE EllIpTICAl
• lEVElING THE EllIpTICAl
• pOWER/MANUAl INClINE OpERATION
• USING THE HEART RATE fUNCTION
21
7/13/11 11:08 AM
Publicidad
