Harbor Breeze PLM52CB5D Manual De Instrucciones página 11

FINAL INSTALLATION
2. Align the three blade arm screws (Q), pre-installed
on the blade arm (P), with the three holes on the
blade (H). Press up on the blade arm (P) firmly so
that the blade arm screws (Q) come through the
holes in the blade (H). Be careful not to use so
much force that the blade arm (P) bends. (Fig. 2)
Repeat for each blade arm (P).
Place the plastic locking mechanism (G) on the
3.
opposite side of the blade (H) as the blade arm
(P), with the shorter end toward the end of the
blade (H) and against the blade arm screw (Q)
on the end as shown in Fig. 3. Rotate plastic
locking mechanism (G) counterclockwise to lock
plastic locking mechanism (G) into place. Repeat
for each blade (H).
Locate motor screws (J) and lock washer (K) that
4.
were removed in Step 5 on page 7.
Insert only one motor screw (J), with lock
washer (K), through blade arm (P) to attach
blade arm (P) to motor and partially tighten
motor screw (J). (Fig. 4) Repeat with remaining
blade arms (P).
Insert remaining motor screws (J) with lock
5.
washers (K). (Fig. 5) Repeat with remaining blade
arms (P). Tighten all motor screws (J) securely.
2
G
Q
P
3
H
Q
4
K
P
J
5
H
P
H
G
P
H
D
P
K
J