Electrical Connections - Kichler Parlour LED 300320 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ELECTRICAL CONNECTIONS

WARNING: To avoid possible electrical shock, be sure you have turned off
WARNING:
To avoid possible electrical shock, be sure you have turned off
the power at the main circuit panel before wiring. Follow the steps below
the power at the main circuit panel before wiring. Follow the steps below
to connect the fan to your household wiring. Use the wire connecting nuts
to connect the fan to your household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connector with electrical tape. Make sure
supplied with your fan. Secure the connector with electrical tape. Make sure
there are no loose wire stands or connections.
there are no loose wire stands or connections.
WARNING: If your house wires are different colors than referenced in this
WARNING:
If your house wires are different colors than referenced in this
manual, stop immediately. A professional electrician is recommended to
manual, stop immediately. A professional electrician is recommended to
determine proper wiring.
determine proper wiring.
Step 1. Insert the receiver into the mounting bracket, and keep flat in
Step 1.
Insert the receiver into the mounting bracket, and keep flat in
opposition of ceiling. Cut off excess fixture wires approximately 6 to 9 inches
opposition of ceiling. Cut off excess fixture wires approximately 6 to 9 inches
above top of the downrod assembly. Strip insulation off 1/2 in. from the end of
above top of the downrod assembly. Strip insulation off 1/2 in. from the end of
each fixture wire.(Fig. 13)
each fixture wire.(Fig. 13)
Step 2.
Step 2. Motor to Receiver Electrical Connections: Connect the BLACK
Motor to Receiver Electrical Connections: Connect the BLACK
wire from the fan to BLACK wire marked "TO MOTOR L" from the receiver.
wire from the fan to BLACK wire marked "TO MOTOR L" from the receiver.
Connect the WHITE wire from the fan to the WHITE wire marked "TO MOTOR
Connect the WHITE wire from the fan to the WHITE wire marked "TO MOTOR
N" from the receiver. Connect the BLUE wire from the fan to the BLUE wire
N" from the receiver. Connect the BLUE wire from the fan to the BLUE wire
marked "FOR LIGHT" from the receiver. Secure all the wire connections with
marked "FOR LIGHT" from the receiver. Secure all the wire connections with
the plastic wire connectors provided. (Fig. 14)
the plastic wire connectors provided. (Fig. 14)
Step 3. Remote Receiver to Outlet Box Electrical Connections: Connect the
Step 3.
Remote Receiver to Outlet Box Electrical Connections: Connect the
BLACK (hot) wire from the ceiling to the BLACK wire marked "AC IN L" from
BLACK (hot) wire from the ceiling to the BLACK wire marked "AC IN L" from
the receiver. Connect the WHITE (Neutral) wire from the ceiling to the WHITE
the receiver. Connect the WHITE (Neutral) wire from the ceiling to the WHITE
wire marked "AC IN N" from the receiver. Secure all the wire connections with
wire marked "AC IN N" from the receiver. Secure all the wire connections with
the plastic wire connectors provided. (Fig. 14)
the plastic wire connectors provided. (Fig. 14)
10 | KICHLER.COM
Mounting Bracket
Receiver
Fig. 13a
Green or bare copper (ground)
AC IN N(White)
AC IN L(Black)
Black ("AC IN L")
Receiver
Black ("TO MOTOR L")
Black (motor)
Ground wire
Blue(FOR LIGHT)
Ground wire
White (Neutral)
Blue(for light)
Fig. 14
6 to 9 in.
Fig. 13b
White("AC IN N")
White("TO MOTOR N")

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido