Sealing With 633F30 Special Grease And 633F11 Silicone Grease - Ottobock 12K42 ErgoArm plus Instrucciones De Uso

Safety instructions
12K42
ErgoArm plus

Sealing with 633F30 Special Grease and 633F11 Silicone Grease

34 | Ottobock
12K44
ErgoArm Hybrid plus
This will ensure a smooth transition to the
lamination protection cap.
Drill four 6mm dia. holes in the humeral sec-
tion just above the lamination ring to provide
ventilation for any moisture that may develop.
After lamination, clean the lamination ring
thoroughly.
Lubricate the groove, inner edge and thread
of the lamination ring with 633F30 special
grease.
Remove all dummy plugs from the electron-
ics housing.
Lubricate the cable connectors with 633F11
silicone grease.
12K42 ErgoArm plus, 12K44 ErgoArm Hybrid plus, 12K50 ErgoArm Electronic plus
12K50
ErgoArm Electronic plus