Safety instructions
12K42
ErgoArm plus
Note:
The arm must be fully extended!
Press joint covers back into place.
42 | Ottobock
12K44
ErgoArm Hybrid plus
Apply one drop of Loctite 243 or equal to
the two elbow joint attachment screws and
tighten them evenly.
Lubricate the wiring connectors with
633F11 silicone grease.
Plug both connectors back into the elbow.
1
Note:
The arm must be fully extended!
Push the bevelled joint cap over the cable
[1].
Slide along the cable and then press the
joint cap into place.
This will prevent any cable damage.
Thread band under axis.
12K42 ErgoArm plus, 12K44 ErgoArm Hybrid plus, 12K50 ErgoArm Electronic plus
12K50
ErgoArm Electronic plus